Browse Forums Owner Builder Forum Re: Cost of Shell? 2Mar 14, 2019 11:45 am Rayan1910 You will need to establish an overall design,budget, work out the materials, quants and apply realistic rates for the trade components. Don't be too fussy at the preliminary stage 1, as you fill in the details and firm up quotes try to stay within the defined boundaries, Generally it should take several iterations ie 1. 2D Sketch-> rough quants 2. Construction/Engineering 3D Drawings/Details->accurate quants 2- Storey, Masonry, Timber Frame, Truss Beam Slab Details 3. Trade Estimate/Quote & check feedback into 2 above Getting the Best Info, Data and use from a site/project Goodluck Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs 7 11983 We were lucky in that our old house was so small (86 square metres) compared to the new house, they were able to take enough readings around the old backyard house before… 8 37139 Fair Trading can issue orders to rectify and complete but once the matter goes to NCAT these orders are automatically vacated. You will have to terminate contract and sue… 21 29708 |