Browse Forums Owner Builder Forum Re: Any info on new Basix since July 2017 and using raised f 5Sep 09, 2018 9:19 am I agree with you. The problem is that you can no longer specify your insulation requirements using the online tool to compensate for the loss or gain in the thermal sections. This can only by someone who uses a nathers approved program in which you need to pay 500 dollars to get a certificate for the thermal section of the basix. I would a stacker door going to the covered deck, but thermal comfort dictates I either have a normal door, or no cover over the deck to get winter sun. Even thermally broken, double insulated doors don’t cut the mustard on the online assessment. It dictates the minimum requirement of r2 for walls and r3.5 for ceiling even though I am well above that using a better design/insulation combination and can’t add this to the tool. 0 2013 Broker here - legislation says that every true broker must put the clients best interests before theirs so in theory they must offer you the best options for you on their… 2 46003 CDC Housing Code 3 When to apply Floor Area external face of wall vs Gross Floor Area internal face of wall. Reading thru CDC Housing Code 3, lets take a lot 915sqm.… 0 16538 |