Browse Forums Owner Builder Forum Re: Installing cedar ceiling lining on steel frame 5Oct 28, 2017 7:05 pm make sure all the roofing is covered with some sort of barrier to prevent condensation dripping onto the cedar. Its always better to coat the side that goes towards the roofing material too. Helps prevent warping, but cedar is pretty stable. Re: Installing cedar ceiling lining on steel frame 6Apr 25, 2018 10:17 pm tjwoody Hi all We are hoping to install secret nail cedar boards in our living/kitchen ceiling and in our alfresco areas, has anyone done this with a steel frame? Would you fix timber to the battens first? Any other suggestions? Very possible that I am wording this incorrectly, my husband is 'builder'! Thanks for any advice! Jude use timber battens Hi I am wanting some opinions about the build of a steel shed I am going to get one about 4.5 x 2.5 m steel shed and the height will be about 2.3-2.4m high The one I am… 0 14435 This is 100% true. You can not hang anything on steel frames. very frustrating 8 5354 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3400 |