Browse Forums Owner Builder Forum Re: Finished per sqm costs for OB 9Jun 20, 2016 1:03 pm You guys are obviously fans of the Georgian Revival style ( as I am ). We don't see many of those on H1. If you are looking at doing this as an OB I'd suggest you may run into trouble doing it all under one licence. An OB licence in NSW will permit you to build only one dwelling on any given property. I know what you are proposing is all basically one building, however knowing how the dept of FT looks at it they will regard it as two structures ( unless they have relaxed this rule of course ). The other thing to do is download " The Gyprock Red Book " which to quote " is the most widely recognised and respected technical fire and acoustic wall and ceiling design guide in the plasterboard industry." Some good info there regarding separation of dwellings for the aforementioned reasons. Stewie Petercurtis You able to contact the certifier and get a copy of your structural plans, if they are not in your contract. If your home was approved via CDC then they… 1 20184 1) I had requested R6 ceiling insualtion batts, however I noticed that on some areas there are huge gaps which will allow hot air to sweep in, and also noticed black/grey… 0 3603 interesting situation what happened after builder issued final invoice? did you list as defect or not does the building surveyor have any responsibility? ie. issuing… 13 46966 |