We are nearing the completion of our owner/builder renovation and now need to brace our 'stumps' and deck.
The extension is about .5m off the ground at the lowest point and about 2 metres at the highest point. The engineer has specced 10mm rod and 10mm plate with 2 x m12 coach bolts in the 90 x 90 h4 treated pine stumps.
I emailed him and asked for more detail but was simply told you can get it from hardware places. I have called a few with no luck.
Can anyone enlighten me as to what i actually have to get in this case? I am assuming 10mm threaded rod with turnbuckles in the middle (have no idea how it connects to the plates etc.)
Thanks in advance.