Browse Forums Owner Builder Forum Re: Steel or timber frame?? 10May 21, 2010 3:51 pm Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Steel or timber frame?? 12May 22, 2010 12:45 am Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Steel or timber frame?? 20May 24, 2010 7:08 pm nomad Hills Guy you do realize that timber frames come in prefab form in the same way steel does? Yes, I realise it can be done that way, but I cant really think of a site I have seen in the past few years in Adeliade that have done it. (other than for a roof truss) Most places I know are not set up to prefab timber, and its usually delivered in lengths and made on site. PS - I realise you can do this with steel as well, but all sites I am familiar with prefab rather than deliver lengths. This is 100% true. You can not hang anything on steel frames. very frustrating 8 5318 Hi I am wanting some opinions about the build of a steel shed I am going to get one about 4.5 x 2.5 m steel shed and the height will be about 2.3-2.4m high The one I am… 0 14434 Hi, I have a steel frame house which was built 2 years ago. When you are down stairs you can hear clunking noises when someone is walking around. We were told if you… 0 4441 |