Browse Forums Owner Builder Forum 1 Feb 13, 2010 2:26 pm Hi all, Can anyone help with some advice. I have built a car port, free standing (as requested by council given it is on the easement) but right up against the brand new 2 br brick unit. From the front it looks like a garage however beyond the front it is only a car port on posts. The front of the car port includes a small 1.2 mtr wall that is on the side property boundary that requires a 60/60/60 frl. The wall is made of 90 x 45 pine and currently has a 7.5mm bluebord on it. The plan was to render the outside of it, together with the rest of the car port until I realised that the side section needs to have the 60/60/60. Will the 7.5mm bluebord plus render be sufficient to achieve the 60/60/60? Ideally, I would prefer to leave the current blueboard on and add another if required before rendering if that will give me my 60/60/60? any advice? thanks Chippy, i hope they have applied sealer but i am doubt to be honest, so i am gonna do this job after handover. 8 16228 Can anyone recommend a good/affordable retaining wall and fence builder that I can get a quote from located in Sydney? 8 45707 Hello, We are about to build and the plans show a part of the exterior wall is being built on top of a limestone retaining wall. Does this mean the retaining wall will… 0 6949 |