Browse Forums Owner Builder Forum 1 Jan 10, 2010 1:02 am “It's just as unpleasant to get more than you bargain for as to get less” George Bernard Shaw. Re: Need a product for Treating expossed steel reinforcment. 4Jan 28, 2010 10:51 pm Where you are coming from is where you are going to... Re: Need a product for Treating expossed steel reinforcment. 7Jan 29, 2010 4:19 pm Could you post some pics? If this is your reo poking out of the side of the slab, then the work is not up to standard and needs to be fixed (all reo must be covered by set amounts and isnt allowed to poke out of the slab) The other option is that it is poking up out of the slab for attaching yet to be completed members to (in which case you dont have a problem, but premature coating may hinder later bonding if not done correctly) Hi I am wanting some opinions about the build of a steel shed I am going to get one about 4.5 x 2.5 m steel shed and the height will be about 2.3-2.4m high The one I am… 0 14435 You’re on the right track, wire brush in a grinder then a zinc rich epoxy primer then a top coat of some sort, like a waterproofing membrane. Raising the concrete would… 1 7020 Hi, I have a steel frame house which was built 2 years ago. When you are down stairs you can hear clunking noises when someone is walking around. We were told if you… 0 4441 |