Browse Forums Owner Builder Forum 1 May 09, 2009 6:34 pm owner builder permit details calls for fairly precise costing for the renovation, any costing guides or guidelines per square metre or a square [a building square i presume ie is 10 feet by 10 feet] any assistance would be greatly appreciated so i may finish my application for the OB permit, so an outline: lifting a timber house pre 1946 attaching a deck and finish off with a lower floor incorporating bedrooms, toilet and TV room, upstairs removing some bedroom walls for a larger living area and renovating the bathroom and kitchen; in a nut shell; bayside area of brisvegas, thanks Re: OB permit costing guide 3May 10, 2009 8:45 am Your permit doesn't have to be that precise... Best get a quote from a builder, cause that is the number the BSA is after! Electrical Engineer... Don't hold that against me... And keen owner builder... Mainly the building part!! Looking to start the journey of becoming an owner builder in SA. Feeling pretty (overly) confident on the building and construction details, but really struggling to find… 0 8419 You wont need a permit to put in non loading partition but you will need a licensed plumber and a licensed electrician 1 6641 I don’t think so as the floor area over 300 square meters then it is class 3…. 12 17936 |