Shed conversion

Bailey67 · Feb 27, 2024 12:46 pm

Hi all I doing a shed/house that has been engineered for this purpose and being built on a slab on the ground. The total size including the awnings is 18 x 30 it’s got 3m awnings on the long sides and a 5m awning at the front. Interior house is 12 x 25m.
It is basically two flats half for me and half for my daughter.

The questions I have are
1. We are using corrugated metal roofing for the interior ceiling with anticon blanket underneath the roof do I need additional insulation.

2. The interior wall frames are not structural so is there a need for structural timber and can I use 90 x 35 untreated

Thanks in advance for any help

building-expert · Feb 27, 2024 3:56 pm

If you are building a house then you will have a building permit, full set of approved plans and specifications, read it, why are you asking questions here?

Bailey67 · Feb 27, 2024 6:31 pm

building-expert

If you are building a house then you will have a building permit, full set of approved plans and specifications, read it, why are you asking questions here?

Because it only states 90mm not if it’s 45mm or 35mm and yes I do have the plans my question was specifically since it’s not the structural value and only to hold the internal wall cover could I use 35mm so unless you have something to add in way of an answer thanks for your reply