Browse Forums Owner Builder Forum 1 Oct 13, 2022 8:07 pm Hi We live on acreage in rural SA; the property had multiple old sheds - none of which were listed on the title search. We kept two of the more stable sheds and last year replaced one of them 6x6m with a new one 6x8m which we built ourselves, following building standards. We'd assumed that no council involvement is required in such cases but were told recently that, if we sell, we'd need to get a retrospective approval for the shed. Has anybody based in SA been through a retrospective building approval? Any advice appreciated. Thanks Thanks. Yeh ideally that would have been good, but have progressed too far now. Hoping some well placed internal walls fixed up into the battens will provide some… 2 5668 Hi, I am sheeting the inside of a 5.7 x 8m shed with gyprock. Unfortunately the shed wasn't designed for internal cladding but I have been framing it up as strongly as… 0 3599 DIY, Home Maintenance & Repair I'm in WA and our sandy soils make drainage a bit easier but this is what I'd be doing. Dig down to your footings and let the wall dry out. Clean it all well by brushing… 1 5437 |