Browse Forums Owner Builder Forum Re: Cable deck balustrade with steel posts 4Oct 23, 2020 8:37 pm Pulse use a nutsert, an internally threaded rivet and screw the stainless swagged wire in Betterhardware.com.au do a flip toggle where you can just drill a hole... Hi I am wanting some opinions about the build of a steel shed I am going to get one about 4.5 x 2.5 m steel shed and the height will be about 2.3-2.4m high The one I am… 0 10540 Seconded; we just used these last weekend to build a small deck. They worked perfectly as we have bluestone in the area where we wanted to build so digging down was not… 8 7704 You’re on the right track, wire brush in a grinder then a zinc rich epoxy primer then a top coat of some sort, like a waterproofing membrane. Raising the concrete would… 1 4207 |