Browse Forums Home Theatre & Automation 1 Jun 23, 2013 1:33 pm Hi All I need to get a 10m VGA cable male to male made up, with out the moulded ends. The conduit the electrician left in the wall is 32mm not 40mm as we asked and the 10m cable ends we have won't fit through. We tried to make one using CAT5 but we keep getting a yellow tinge to the screen. Does anyone know where I can get a custom made one that has no moulded ends that will attach to the wall plate and get down the conduit? cheers Re: Custom Cables - Where to get them. 3Jun 23, 2013 8:57 pm Hi, If you don't find any options before July 13, here's a custom cable maker. Looks like ( Home Page ) he is away till then. Spotted several recommendations on the web. http://www.penhometheatre.com.au/aboutus.htm#services I haven’t. But have a Lowe Design home. Not only did I find Matt Lowe patronising and a bully, but the home is NOT TO CODE. I have water coming through the bricks… 1 14554 Hi everyone. I am a single mother with little daughter, living in a small tourist town in WA Australia. I am thinking to install security screens to all the doors and… 0 25692 Depends how much direct sun it gets. Is there any shading (eaves or trees)? If the sun hits a window directly it doesn't matter too much if it's double or single… 1 12712 |