Browse Forums Home Theatre & Automation 1 Oct 19, 2010 12:01 pm We're in the process of finalizing our prelims and we're starting to look at wiring. Here's our layout: Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ The lounge is 3.5 x 4.6 with 820 mm double doors and is the first choice for the HT. It would seem logical to place the telly along the long wall but I am open to suggestions on moving the doors or going to a single 1020 mm door and/or maybe having the telly on the wall towards the dining area. A projector is far in the future but would like to plan for it by having power and conduit for the cabling to come. The second option is to have the HT in the family area with the telly to the left (the right wall will have a window added). I plan to get in-wall or in-ceiling speakers for the rears but also want to get a pair for the family room as zone 2. What I would like is to be able to use the lounge or family for 5.1 and then the family or lounge as zone 2 - is there such a switch device that will do this for me ? Hi, We're building a double-storey in Perth and I'm undecided with the kitchen sink situation. I'm set on having the main sink with dishwasher in the scullery - and… 0 20938 Yes it had a house on it. But Melbourne water only wanted something the original size of the existing house. We managed to fit a 45sq house on. 10 33668 Hi All It has been a few weeks since my last update. The build has been progressing well. No major issues to report. The scaffolding was dropped today, gyprock will be… 96 357043 |