Browse Forums Home Theatre & Automation Re: Suggestion on dedicated cinema room 10Aug 18, 2007 8:29 pm yes, that is me. I never liked the 1292 much compared to some other CRTs.x
anyway, I'm not sure what you're asking about with regard to all the measurements that you provided, its not very clear. On the screen type, I'd suggest a fixed screen, not glass beaded, but maybe something a bit more reflective than a unity gain matt screen. Depends on how much money you want to spend. you could do something with a ready made screen from a local seller, to something high end like a stewart, or do a DIY job with some kind of pearlescent paint like gesso or something more impressive like screen goo. As for masking I'd suggest not bothering with a 4:3 screen, I doubt you'll get much use out of the extra screen material. just watch the 4:3 material (which I'm guessing will be in the minority) with black bars in the 16:9 frame. I'd suggest a masking system for 2.35:1 films though, there are many different ways you can acheive it depending on your DIY skills. There is plenty of info on this on AVSforum.com if you feel like doing some reading. Thank for yes basically what to remove and what to add, where to place them 2 7328 No the fireplace doesn’t work. It’s been enclosed. I’m not sure what was removed, as it was done quite some time ago - well before what I can see with photos online… 2 11584 I have a really long hallway which is 1100mm W x 11500mm L I would appreciate if anyone can give suggestions to light it up with Linear LED lights that goes from wall to… 0 8814 |