Home Theatre & Automation
Apr 08, 2009 7:25 pm
Just wondering if anyone can help me out. I have a steel frame house in construction as you all know and was wondering which is the best way to install the projector mount. You can see in the pic below the hdmi cable is taped to part of the frame. Is that part ok to screw the projector mount into? If not should it be the frame a bit to the right in the photo that won't be flush with the plaster?
I am looking at buying a mount from selby's. Will they work ok with steel frame? I have no idea, so looking forward to responses...
Re: Installing a Projector Mount with Steel Frame house...2
Apr 08, 2009 11:36 pm
Straight into the steel is fine...or you could just put a large block of flat wood in the celing a screw into that to get the projector in the centre of the room.
The Selby brackets will be fine either way!!
Australia wide Local Call - 1300 130 336
Click here to look around: http://www.benq.com.au
Re: Installing a Projector Mount with Steel Frame house...3
Apr 09, 2009 10:58 am
If you're not so sure about pre-drilling and then screwing into the steel frame, all the block of wood method requires is for you to slide some roof tiles out of the way (after the place is finished), put a decent sized block/plank of wood on top of the ceiling plaster ("liquid nail" it in place if you are doing this on your own) then pre-drill and screw the bracket into it from underneath.
You will need to put a big enough hole in the block/plank to pass the cable(s) through too...
Audio Visual Dreams
The Complete Custom Home Theatre Company
Re: Installing a Projector Mount with Steel Frame house...4
Apr 10, 2009 2:40 pm
Thanks Matt and Rod, problem is now fixed.. I checked my plans and saw it stated provided noggin for future projector... So I called my Site Supervisor yesterday and he is going to get the chippie to put a timber noggin in as he is there now doing the doors and architraves, they didn't see it as it was on the electrical plan which is a silly spot, since the electricians don't do the noggins.
Sign in or Join to reply to this Topic
KrushullVery noisy steel frame houseVery noisy steel frame house
Thanks all, sorry for the slow response. We are getting an engineering report done this week to check out the cracks and the noise so hopefully that will shed some light…
StructuralBIMGuyExtensions for a steel frame houseExtensions for a steel frame house
TCKID Welcome to the forum If you wish to put up a rough sketch, budget, data (ie areas) and more specific info I am happy to help with preliminary Engineering &…
StructuralBIMGuyAdvice for a steel frame construction [pole house on slope]Advice for a steel frame construction [pole house on slope]
Pretty sure I have the contact for a Chinese fabricator that one of my clients ordered Steel fabricated windows, frames and doors, just p.m me and i'll give you the…
Met_LibertyVerveHybrid Steel Frame vs Wood FrameHybrid Steel Frame vs Wood Frame
Hello Thanks for your response. By Hybrid I meant Steel wall frames with timber roof trusses. Evidently the wood roof trusses allows for tiled roofing. Thanks