Browse Forums Home Theatre & Automation Re: assistance with pre-wiring 4Dec 12, 2017 8:30 pm Nuri Yeah I noticed the power had all been run in and was wondering how the acoustic batts get installed with all the cabling in the way. Can I also run a conduit down the wall, or will this interfere with the insulation? Only want to do this for the HDMI cable run from the ceiling cavity to the wall where my cabinet will be, to make it easier to change it out afterwards in case it fails. I put in an Optic fiber HDMI cable along the ceiling inside a flexible conduit along with a pull rope well before the insulation went in. Since the conduit was only 1/2” wide, it did not seem to cause any interference with the insulation. Re: assistance with pre-wiring 5Dec 13, 2017 7:41 am Cheers, I ended up running all my cables before insulation went in, except HDMI. I ran 20mm conduit in the wall where the receiver will be, then once the insulation went in i got in the roof and dropped the cable down the conduit and left the other end just sitting on top of the insulation. Plaster went on the next day. Hi, Appreciate any recommendations for town planners or advisors who can help assist to assess and draft an objection to a neighbour’s development in Northern Beaches.… 0 3620 Hey guys, We're very new to building and have got our contract back with a, btw you need a retaining wall, addition. Going by my very limited ability to read site… 0 2672 |