Browse Forums Building A New House Re: What brick did you use for narrow, single story home? 3Jul 27, 2020 3:02 pm CM44 Hi, I saw you're building in Austral, if you have time before your selection appointment, you can ask PHG and Austral bricks to send through a list of homes/addresses that have used these bricks previously (and they can also provide a list of where specific colours from Monier roofs have been used). There are lots of homes in Willowdale and a couple in Oran Park that have used these 2 bricks and you could see how they look on slim/narrow houses. After spending a couple of days driving around we opted against Smokey Grey as the indents in the bricks are quite noticeable from the street and that just personally was not what we were looking for. Good luck! Thank you, I will do that. What brick colour did you end up going with? Hey everyone! After lurking here for a long time and reading some amazing build journeys, I decided to document my own build to offer a blow by blow of building in Perth… 0 523 If what you describe is correct then the brick wall has been dry lined with villa board. That basically means that the villa board is glued to the brick wall with… 3 5893 Thanks again for this information. If you do hear anything different, would be great to know 4 5854 |