We're thinking of buying an old home, knocking down and building our own.
We are happy taking a standard design from a major builder. We have found some floor plans and designs we like, so don't need to customise too much.
When using a cookie cutter standard design from a major builder: How much do prices vary according to the area?
We're looking at building in a suburban area not far from the city, where most of the homes were built in the 1950's. We are focusing on flat blocks.
Using Major Builder in different locations
Page 1 of 1
A second and related question:
We have only been looking online, not yet commencing the daunting process of getting the builders out to a site for a consultation.
Our specs would be:
- Knockdown old house
- Build a mid-level quality, medium sized single storey home with a major builder
Roughly what will our total cost be? Just looking for a ballpark figure before we start talking with different builders.
We have only been looking online, not yet commencing the daunting process of getting the builders out to a site for a consultation.
Our specs would be:
- Knockdown old house
- Build a mid-level quality, medium sized single storey home with a major builder
Roughly what will our total cost be? Just looking for a ballpark figure before we start talking with different builders.
Related
25/04/2024
0
Hi All, This is our second home build and first time with a custom builder. They are small builder and have built some houses with good quality. They tender and color…
11/11/2023
2
yep you need a joint, foam is easiest, will look fine once rendered with a joint.
15/12/2023
0
Hi, have purchased a house with 2 single garage doors. The Centre pillar one side sits proud to the other. Can I change 2 doors into one. Please see picture.