Browse Forums Building A New House 1 Feb 11, 2020 11:46 pm We're thinking of buying an old home, knocking down and building our own. We are happy taking a standard design from a major builder. We have found some floor plans and designs we like, so don't need to customise too much. When using a cookie cutter standard design from a major builder: How much do prices vary according to the area? We're looking at building in a suburban area not far from the city, where most of the homes were built in the 1950's. We are focusing on flat blocks. Re: Using Major Builder in different locations 2Feb 11, 2020 11:49 pm A second and related question: We have only been looking online, not yet commencing the daunting process of getting the builders out to a site for a consultation. Our specs would be: - Knockdown old house - Build a mid-level quality, medium sized single storey home with a major builder Roughly what will our total cost be? Just looking for a ballpark figure before we start talking with different builders. Hi All, This is our second home build and first time with a custom builder. They are small builder and have built some houses with good quality. They tender and color… 0 593 yep you need a joint, foam is easiest, will look fine once rendered with a joint. 2 5241 Hi, have purchased a house with 2 single garage doors. The Centre pillar one side sits proud to the other. Can I change 2 doors into one. Please see picture. 0 6353 |