Browse Forums Building A New House Re: Crooked walls, bulk head, edgings... 4Mar 04, 2019 6:44 am Two mistakes 1 Getting inspector recommended by the builder 2 Getting inspector that identifies defects but does not know how to guide you That's why you are still asking questions Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog The photo is not really clear but to me it looks like twist in the cornice. Slight anticlockwise rotation at the top of the cornice and slightly clockwise at bottom should… 8 8467 I'll look into different shower heads and ask the plumber about some engineering and see what he says. Thanks 2 9535 If you can calculate the reasonable charged head from let's say 100mm below the gutter to the top of where the vertical riser's horizontal discharge pipe will be, that… 11 17516 |