Browse Forums Building A New House Re: New home build - Custom Design WA 81Aug 16, 2019 12:31 pm Rain has interrupted work a bit recently. However we were pleased to see the external render done this week, as well as the window glazing. We choose super grey tinted glass for the front elevation. It was the darkest available, but it was the only one without a purple or green tint to the glass. We were nervous to see how much it darkened the rooms, but thankfully it wasn't too dark at all. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ New home build - Custom Design WA 82Aug 16, 2019 1:25 pm Looks great! Our scaff came down this week too but I can’t seem to get a good pic of our facade, as the construction fence gets in the way Re: New home build - Custom Design WA 85Sep 07, 2019 4:51 pm Not a lot of work again this week. Danmar have painted the eaves and commenced the timber lining on the eaves to the front of the house. I'm not sure why there has only been 3 days of work on site during the last 2 weeks despite good weather. Danmar did mention that we had a new supervisor, but we're getting frustrated at the lack of pace. We were 2 weeks ahead of schedule before and now have fallen behind. I hope it picks up. The were a few blemished glosswood boards used in the lining, but we have been told that they will be replaced. Like ⋅ 3 comments ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: New home build - Custom Design WA 86Sep 07, 2019 7:11 pm Shame, it’s so frustrating when they stop during good weather! Re: New home build - Custom Design WA 88Sep 10, 2019 6:43 pm amilelka Not a lot of work again this week. Danmar have painted the eaves and commenced the timber lining on the eaves to the front of the house. I'm not sure why there has only been 3 days of work on site during the last 2 weeks despite good weather. Danmar did mention that we had a new supervisor, but we're getting frustrated at the lack of pace. We were 2 weeks ahead of schedule before and now have fallen behind. I hope it picks up. The were a few blemished glosswood boards used in the lining, but we have been told that they will be replaced. Like ⋅ 3 comments ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ House looks great, how long are they estimating until finish? Re: New home build - Custom Design WA 89Sep 10, 2019 7:09 pm darb74 Yeah that void should make that living space downstairs feel very spacious. It’s probably good too that you have some open area there, as when we were in our house yesterday, the winter sun was coming right into our main living space (only 10+ metres x 5.4m but with a WIP and small study at both ends) ...but anyhow wow the temps were getting warm in that area! I mean it’s a good thing considering outside was about 9-10 degrees but it actually got me a bit worried that with too much north glazing and not enough floor space we could find ourselves having to open a window or two in winter? I think your design is definitely larger and more open on that north side than ours so you likely would be better off in this regard. When I worked out our glazing sizes I mostly used a government report that suggested around 25% glass to floor area assuming good solar access and concrete floors. We originally had tiles selected but have since changed to vinyl planks, so anyhow we’ll have to just see how it goes once we have all our furniture in and living there. I am considering seriously installing one of those cheap air/heat transfer system (basically just ceiling vents with ducts and an in-line pump through your roof) that suck air from one area to another. Our current house has one. The areas of our house not facing north were noticeably cooler yesterday so I’m thinking I would just dump the warmed air into the centre of the main hallway. Anyhow who would have thought over heating in a cold Ballarat winter would be a possibility?! Maybe a good problem to have? Lol I see you are installing vinyl planks in your lovely new house, what manufacturer and colour did you decide on? Re: New home build - Custom Design WA 90Sep 10, 2019 8:40 pm RosHa House looks great, how long are they estimating until finish? Thanks, they're estimating handover in February, although this also includes a lengthy christmas/ new year company closure. If they manage to speed up a few weeks then we might get handover before Christmas, but I'm not holding my breath. According to the supervisor, our delays are being caused because the eaves need a glosswood round trim to finish them off. These have been on backorder and won't arrive until this week. Until the eaves are finished they can't remove the scaffolding which stops them from doing any other work. Seems silly that work stops over a little trim, but I guess we'll have to be more patient. Re: New home build - Custom Design WA 91Sep 10, 2019 10:21 pm amilelka RosHa House looks great, how long are they estimating until finish? Thanks, they're estimating handover in February, although this also includes a lengthy christmas/ new year company closure. If they manage to speed up a few weeks then we might get handover before Christmas, but I'm not holding my breath. According to the supervisor, our delays are being caused because the eaves need a glosswood round trim to finish them off. These have been on backorder and won't arrive until this week. Until the eaves are finished they can't remove the scaffolding which stops them from doing any other work. Seems silly that work stops over a little trim, but I guess we'll have to be more patient. Are they progressing with interiors whilst this delay happening? Re: New home build - Custom Design WA 92Sep 13, 2019 7:29 pm There was a bit of work going on in the interior this week. They have chased the walls for the electrical cables, and installed the plaster beads on the walls. The interior scaffolding is in the way in some places, but they seem to have worked around it. There still hasn't been any progress with the outside eaves, but I'm glad they've at least done something. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: New home build - Custom Design WA 93Sep 21, 2019 11:28 am Plumbing tubes were done this week. Still no progress on the eaves though. At least the builder has removed the unnecessary scaffolding so that we can progress on the inside. It was exciting to have the internal scaffolding come down so we can see what our voids are like. The feeling of height created is great, and there is a lot of natural light. Which is a good thing since we plan to paint some of our walls black! Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Morning sun coming in through the courtyard. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ View from entry into living area. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ View from dining room to living. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ View from living room to dining/ courtyard Re: New home build - Custom Design WA 95Sep 27, 2019 7:08 pm Looking good. And your site looks so tidy! Re: New home build - Custom Design WA 97Oct 05, 2019 12:38 pm That games room will be a lovely space, with the light coming in from both sides. Re: New home build - Custom Design WA 99Oct 06, 2019 6:08 pm Hi Amilelka, I agree with the natural light...actually your whole house should have plenty of it looking at the build so far. I notice you have a number of large sliding doors. What style/type are you using? I'm assuming they're mostly multi-panel opening doors? We have just one in our place, and it's an aluminium 3.6m wide, with 3 panels (2 fixed and 1 opening). Looking at these larger doors it seems to make the flyscreens more technical challenging. But I guess if we went with say french doors, then it is more difficult to leave the cracked open for airflow (with flyscreens in use)? Also how have you found your builder so far? We are close to handover and to be honest a bit disappointed with our builder overall. They are local and smaller, I think doing around 30 houses per year. Our design is a heavily customised version of one of their plans. I think I expected them to be more flexible and offer a more personalised service. Most of their trades have been fairly good though. How far do you think are from handover? --------------------------------------------------------------------- Check our Homeone build blog here Re: New home build - Custom Design WA 100Oct 06, 2019 8:58 pm We are using a combination of residential and commercial sliding doors. The games room has 2.4m high residential sliders which will have sliding fly screens. In the family and dining rooms the doors are commercial and go all the way to the ceiling. They will be 4 panels each with 2 panels opening in the middle. If we want to put fly screens on these then we will need to add some sort of retractable screen after handover as they are not included. We have been told that the dining room doors will be very heavy to open as the glass panels are each 1.5x3m in size. We have been told to expect handover in February. We are slightly behind schedule due to delays with our eaves but the trades booked moving forward seem to be compensating for this. So far we haven't encountered any major issues and the small ones have been taken care of without any fuss. ideal house depends on the site and location as much as internal floor plan....what is the distance from the house to all four boundaries, where is north, describe your… 3 15337 6 55604 So it looks like we finally have some movement on site! Definitely later than expected, but I'll take any progress at this point. I'll drop by over the weekend to get… 5 29162 |