Browse Forums Building A New House Re: Brick Issue with new house, rendering whole house, re-br 23Dec 11, 2019 1:30 pm Mate, we are still waiting on trial period with the latest coating they have applied. So far holding ok, plan is to wait another 2-3 months and then see...if all good then coat the whole house with new paintwork....I enquired what the product is from Buildpro and builder, couldn't get a detailed answer but it is supplied by Guard It, same people that supplied the sealer MVR. I would suggest try getting in touch with them, my fellows have been talking with rick@guarditsolutions.com.au. Hope that helps Re: Brick Issue with new house, rendering whole house, re-br 24Mar 04, 2020 2:09 pm Renfar Hi again, Just wondering how your bricks are going? Our staining is reappearing and they want to treat it again. Hi Mate, Just thought I would update you, the latest works on the bricks seem to be holding up. Buildpro/Guard it products. 2-3 coats of sealer applied, then 1 coat of MVR then some paint colour matched to original bricks painted on the bricks. They a patch and almost 6 months holding well. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Brick Issue with new house, rendering whole house, re-br 25Sep 13, 2020 10:39 pm Renfar Hi again, Just wondering how your bricks are going? Our staining is reappearing and they want to treat it again. Hi Renfar, Any update regarding your bricks? The colour coating that was applied - didnt hold and stains have re-appeared - after lots of fighting - I have put forward to be compensated - possibly for render but a whole lot more...just thought I would check if you had any luck at all? Is it possible to render an old corrugated iron shed.I have heard that it can be done if it is covered with chicken wire first.Not sure of the ratio of the render mix and… 0 4896 Dear Members I have to decide the Facade column size. My custom builder standard is 350mm with rendering, but i asked for 470mm plus stone or tiles and yet to get… 0 7497 |