Browse Forums Building A New House Re: Hebel overhang 2May 25, 2018 11:52 pm The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Re: Hebel overhang 4May 31, 2018 6:18 pm well they certainly didn’t do that. I know they put some sort of cement to widen the slab and then rendered over it. Have asked my building surveyor to reinspect. http://anewhouse.com.au/2014/02/overhanging-brickwork/[/quote] In the end, two pieces of treated timber (20mm thick) were bolted onto the joists and planed when there was too much sticking out. Passed inspection. 13 7011 Thanks Ardo, they are sort of semi concealed. I think it is only a few millimetres. I see if they can adjust the hinges. 4 2401 Building Standards; Getting It Right! Also an expansion joint. It will probably be better to silicon it? What I don't like is that joints between panels are not properly rendered and look ugly. 1 24740 |