Comments are welcome as I still have opportunity to fine tune it!
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Changes that have been asked are -
- Provide 600mm wide eaves to lower storey of House and Garage. NBN
- Co Fibre-Optic estate pack including: Lead-in cables and conduit from Meter Box to WSC in garage, 1 WSC (Wired Services Cabinet) installation in garage as per specification, 1 RJ45 Data Hub within WSC, 1 Double GPO within WSC as required, 3 Data/Phone point. Insulation
- Provide R6.0 high performance Gold insulation batts to Ceiling in lieu of standard. Provide R2.5 Soundscreen insulation batts to all internal/external walls. Bath / Bed
- Provide 1200mm high x 1800mm wide Aluminium awning window to Bedroom 2,3,4.
- Provide 350mm high x 1500mm wide Aluminium square set reveal awning window to Ensuite wall
- Provide 325mm high x 1025mm wide x 90mm deep tiled niche to bed 2 ensuite and powder bath.
- Provide 1No. 425mm high x 425mm wide x 90mm deep tiled niche to the Ensuite shower wall.
- Provide relocation of bed 2 door to Bed 3 and Bath wall. ( creating 2nd Ensuite).
- Provide quickslides including 2340 x 720 Mirrored doors in lieu of standard robe doors to bed 2,3 and 4.
- Provide two 720 wide x 2340 high flush panel hinged doors to master ensuite in lieu of standard opening.
- Provide 1500 high x 2400 wide Aluminium square set sliding window to kitchen rear wall in lieu of standard 200mm high x 2400mm wide sliding window.
- Corner treatment Living Area
- Provide two 1800h x 1500w square set reveal windows to Family rear wall in lieu of standard sliding windows.
- Provide 1200 wide x 2100 high square set awning windows to Lounge in lieu of standard 2400 wide x 1500 high sliding window.
- Provide one 2250mm high x 3000mm wide Aluminium Boutique square set reveal sliding door (2No. panels) to Rumpus side external wall in lieu of standard 2100mm high x 2400mm wide Aluminium sliding door.
- Provide 1800h x 2700w square set double awning window to rumpus rear wall in lieu of standard.
Kitchen - Provide reconfiguration of the Kitchen Bench layout. Delete island bench and provide 3000mm x 1200mm kitchen Bench. Relocated sink and dishwasher.
- Provide 1No. 600mm high x 3600mm wide Aluminium square set reveal fixed picture window to Kitchen side external wall in lieu of standard face brickwork. Garage
- Two meter garage extension with roller door at back.
- Provide relocation of Garage door to the extension side. Provide additional 1800 high x 1200 wide fixed window to front of elevation of garage.
- Stud and plaster finish to garage internal walls. Heating
- Decided to go with what is offered by PD. Will add 2 zones.
- No cooling. If required will do post build. Appliances
- Apart from rangehood, the remaining appliances (diff. from PD supplied) will be installed post build. Will supply the specs to ensure the cutout is done by PD. PD appliances will be supplied in original
Eaves