Browse Forums Building A New House 1 Sep 27, 2017 9:57 pm Hi all, Any recommendations for a fence builder for an metal steel electric sliding gate + front fence in South East Melbourne? I am looking at a cantilever fence ideally. I am also looking to build it more than the maximum 1.2m allowed by Monash Council, so will need to apply for consent and permit. This means I need to draw the full design of the fence according to council ; which includes the distances between vertical & horizontal members of the fence. So ideally the fence builder will be kind enough to provide a sketch of this, and I will draw it up myself to submit to council. Tried googling but seems difficult to get any reviews for fence builders Thank you Hi all. I'm thinking of installing an electric gate in front of this street front villa (link below). The gate would be between the bush on the left and the letter box on… 0 2779 Hi everyone! This is my first time posting here, and I'm looking for some advice regarding my house construction project in North Kellyville. I… 0 6701 Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 9083 |