Browse Forums Building A New House 1 Dec 18, 2019 12:31 pm My builder has advised that it's illegal to install a Banton light in the ceiling area (under the tined roof), due to the risk of electrical fires. Please confirm if this is correct since I could not find any reference to this on the QBCC on online. Cheers Re: Banton installed in roof cieling area 2Dec 18, 2019 8:46 pm This is the link my builder has provided and suggests that the Banton light should now be installed in the roof now. Appreciate if any certified electricians can confirm if its illegal to install the banton lights in the roofing area under the tin roof and if I should accept the builder advice avoid this although this is agreed in the plan. https://www.worksafe.qld.gov.au/constru ... ing-spaces CDC Housing Code 3 When to apply Floor Area external face of wall vs Gross Floor Area internal face of wall. Reading thru CDC Housing Code 3, lets take a lot 915sqm.… 0 16753 The unit normally clips into a metal plate screwed to the wall, either plate is not flush, or unit not hooked in and could be hanging from the pipes partly, either might… 2 15861 Even if it's not being sub-divided and you want to keep it as Torrens title, you will still need to talk to a town planner or Council themselves, to see if they will allow… 1 11163 |