Roadside fence was finished today.
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Gate on the garage side.
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
We had a gate put in the back corner to allow access to the nature strip for mowing and putting bins out etc
Hi,
Noticed your fencing around the corner block? Which council is yours?
We are also building on a corner block. Our council will not allow fence to be higher than 1.2 meters...
Did you have to apply for special permission or your council aren't that strict.
Thanks.
Hi
We're in Greater Dandenong. Yeah being on a corner sucks sometimes, lol
Side and boundary fences no more than 2m high. We went with 1.8m
Front fence no more than 1.2m. We haven't done the front yet. Still deciding what we want.
Now the catch being on a corner - we can't have a fence more than 1.0m high, within 9m of the point of intersection of street alignments.
So you'll see in I think pic 2 where the fence starts. That is about 9.5m from the road.
We're not taking our chances with anything with the council. They are strict. They originally knocked back our setback and then later closed down our site for a day because one of those elevator things to take roof tiles up was partially on the footpath.
Yeah being on a corner I had some tree branches slightly over the limit council had set - they sent me a notice to cut the branches off by a set date or they will and charge me around $3000 - to cut two branches over the corner fence