Browse Forums Building A New House 1 Aug 09, 2008 10:16 am Is $1200 per sqm for a 2 story home with a reasonable spec include,,,
eg tony alda tapware, stone bench top, powdercoated ballastrades, shower screens, feature stone work and render to front elavation, no balcony, double garage, approxamately total of 268 sqm. Built in Perth. Re: 2 Story price Per Metre 2Aug 09, 2008 2:56 pm Does that include floor coverings and light fittings?
Custom design or project home? If it was a project home I'd say it was a bit on the expensive side. Though Perth prices are always different because of the double brick issue. As a guide we are paying just over $1000/m2 including lighting, floor coverings, stone benchtops in kitchen and all bathrooms, bushfire protection, balcony upstairs at front and rear of house, sandstone cladding in facade. However - Sydney buildings are brick veneer only. After 4 years - we're in! Re: 2 Story price Per Metre 3Aug 10, 2008 10:28 am I probably looking at about $1000 per sqm in Brisbane area including floor covering etc. Again it depends on the size of the house and inclusion. And in the end, it's not the years in your life that count. It's the life in your years. 1) I had requested R6 ceiling insualtion batts, however I noticed that on some areas there are huge gaps which will allow hot air to sweep in, and also noticed black/grey… 0 3585 Hi, We have a single story MacDonald Jones house, on a waffle pod slab with steel frame. Are we able to build a second story extension? Other info is we are 900mm from… 0 8443 We bought land in Tallawong Schofields NSW size 30m X 12.5m and planning to get double story house build around 350 sqm. We are thinking about having premium inclusions… 0 4074 |