Browse Forums Building A New House 1 Oct 27, 2016 12:01 pm Re: Raised ceilings in a section of your house? 7Oct 27, 2016 6:29 pm Building a Madison 45 with Porter Davis Madison 45 Blog (Send me a PM with your email address to be added) Re: Raised ceilings in a section of your house? 8Oct 27, 2016 7:41 pm newwyhouse22 lozza81 You would need to do a split level design so a step down in your house. Its a good idea if you have a slight fall on your block. We have our laundry, kitchen, dining and main lounge room stepped down which will give us 3.1m ceilings. So in the pic you are looking towards the front door and the front of the house which has 2.7m ceilings. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Do they usually charge alot to do the step down? Our house is a custom design by a building designer so cant give you any info on pricing difference. He just suggested a split as it was better to spend the extra $$ inside and benefit from high ceilings then to spend money on cut and fill due to our block slope. Thanks mate. Yeah good points! Leaning towards Option 3 to get a bit extra space in the cabinets but not going too crazy high (and expensive). Would require a mini… 13 39703 I was quoting framing timber sizes from Australian Standard AS1684.4 Table A13 for 2700mm wall heights Tile Roof, single storey. This Australian Standard doesn't refer to… 8 7328 Title: Expert Tips for Painting Your Own House: Insights from Brisbane Painting… 0 271 |