Browse Forums Building A New House 1 Jun 07, 2017 7:04 pm Hi all seeking some clarification as our SS won't get back to us untill tomorrow which is fine. We have just started having our render done and I have noticed this strange gap in the render that resembles a control/expansion joint however it is not meant to be there on the plans or elevations and there is one on the RHS were it is supposed to be but from my limited knowledge it looks terrible and shouldn't be there Thanks all Seeking any advice if possible Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7300 i had the my concreters concrete right up to the fence. I have pits all along my path, so the water tends to drain away from the house and into the pits. There's only one… 7 12876 All 3 items listed are defects and are of concern. Please seek qualified independent inspector and/or legal advice for your state. 1 8283 |