Browse Forums Building A New House Re: Info & tips for those building in BAL40 and Flame Zone 28Nov 15, 2018 12:53 pm Hello Everyone, It is an older topic but someone could benefit from this in the future. We have a building system www.panelup.com.au which works really well in Bush Prone areas, our system complies to be used up to BAL-40 without any additional costs, you would be saving tens of thousands of dollars, plus you get very high energy rated home. We are based in Illawarra NSW but we manufacture and supply our system Aus wide, we have number of Builders using our system, but if we don't have a Builder in your area you can approach any local Builder and ask him to work with us, instead of ordering frames & trusses, they order complete house kit from us. We use Bondor SIP panels and Solarspan roofing panels. Any questions feel free to get in touch, hopefully this topic saves money to someone. Re: Info & tips for those building in BAL40 and Flame Zone 29Sep 01, 2019 11:57 pm Hi there, this is a great thread. Thank you all for sharing all these info. We are looking at a block of land in North Kellyville NSW with greenery at the back. We always wanted a house with a yard overlooking open space/ green (not roof/room of another house). We found such a block but very worried about the BAL rating of the lots. As the trees are right at the last border of the block, are we looking at FZ or BAL 40 for the lot 2,3,4 & 5? Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Info & tips for those building in BAL40 and Flame Zone 30Sep 02, 2019 5:58 pm Faykis it depends on the slope of the land, if there is a large slope then the BAL will be higher, lot 5 looks like it has the most clearing. There is an online tool, that can help you work out the BAL based on slope, distance and type of trees. Alternatively if you’d prefer, yo could pay a Bushfire consultant to do a basic score (about $500) Re: Info & tips for those building in BAL40 and Flame Zone 31Sep 02, 2019 8:38 pm gogo65 Faykis it depends on the slope of the land, if there is a large slope then the BAL will be higher, lot 5 looks like it has the most clearing. There is an online tool, that can help you work out the BAL based on slope, distance and type of trees. Alternatively if you’d prefer, yo could pay a Bushfire consultant to do a basic score (about $500) Thanks heaps Gogo65. We are trying to work out the slope. I think it will be downgoing slope as the bushland turns into a creek. So probably it will make the rating worse Re: Info & tips for those building in BAL40 and Flame Zone 32Oct 27, 2019 10:04 am Hi everyone. I’m in a BAL40 zone and looking for a new compliant front door. The house is 1950s brick and we’re looking for a timber front door with glazing bars. I haven’t gotten a response from Stegbar yet but thought I’d ask here if anyone has done something similar. TIA. Re: Info & tips for those building in BAL40 and Flame Zone 33Dec 19, 2020 8:52 am Hi All, has anyone had any experience in buying windows from China for Flame zone? As i had a quote for 200k from Australia and China seems much much cheaper for the same steel framed 10mm window, this will stop you from having shutters. Re: Info & tips for those building in BAL40 and Flame Zone 34Dec 20, 2020 5:35 pm Hugo1981 Hi All, has anyone had any experience in buying windows from China for Flame zone? As i had a quote for 200k from Australia and China seems much much cheaper for the same steel framed 10mm window, this will stop you from having shutters. Dont really keen to pay 200k for windows to avoid shutter. External shutter with eligible windows should be more reasonable in my likings Re: Info & tips for those building in BAL40 and Flame Zone 35Dec 21, 2020 8:01 pm I would suggest you double-check the windows/frames from China meet the Australian Standard before purchasing anything. It would be a shame to import the windows only to find out they don't meet the standard and can't be used. Re: Info & tips for those building in BAL40 and Flame Zone 36May 18, 2021 3:49 pm Hugo1981 Hi All, has anyone had any experience in buying windows from China for Flame zone? As i had a quote for 200k from Australia and China seems much much cheaper for the same steel framed 10mm window, this will stop you from having shutters. Hi Hugo. I would be cautious. A 'Flame Zone' window should be tested to AS1530.8.2. 10mm glass (float or toughened) will not pass this test. If you would like a rundown on what products are available, feel freee to call or email me at Sonnenschutz.com.au. Hi All It has been a few weeks since my last update. The build has been progressing well. No major issues to report. The scaffolding was dropped today, gyprock will be… 96 357051 https://form.jotform.com/240284569218058 Please spare a moment to fill out this survey form for a project. You stand a chance to win a digital gift voucher. Legitimate… 0 2835 Yes it had a house on it. But Melbourne water only wanted something the original size of the existing house. We managed to fit a 45sq house on. 10 33668 |