Browse Forums Building A New House Re: Self installed soakwells in Perth 4May 28, 2015 9:01 pm Our build thread: https://forum.homeone.com.au/viewtopic.php?f=31&t=70984 Re: Self installed soakwells in Perth 9May 28, 2015 10:30 pm Our build thread: https://forum.homeone.com.au/viewtopic.php?f=31&t=70984 Re: Self installed soakwells in Perth 20Jun 30, 2015 10:58 pm My builder give us an option to get the trader to install the soak well ourselves for $3586. We have to get rid off the excess sand our self or we can go with them for $1500 extra, and they remove the excess sand. I went with the builder, because they put the soak well in at the slab stage. I don't think you can DIY concrete soak if it is 1.5m diameter and 1.5m deep. Hi guys, I want to do some floor levelling before laying the planks and am considering doing it with self-levelling or yellow tongue PB board. I am wondering which one… 0 6532 The unit normally clips into a metal plate screwed to the wall, either plate is not flush, or unit not hooked in and could be hanging from the pipes partly, either might… 2 15786 I am not sure whether Perth has its own way of doing things in regards to this. Most of Perth has class A (sandy soil), except for some areas near rivers or hills. 2 13091 |