Browse Forums Building A New House 1 Feb 14, 2015 4:39 pm Hi All, Most builders are using the Timber grade F5 for Frame stage. with the following dimensions: Timber 90 x 35mm Ground Floor – 450mm centres First Floor / Single – 600mm centres Internal and external are the same. Did anyone Upgrade the Timber Frames to 90 x 45 MGP 10 with Henley . If so how much was the upgrade cost? Any advise would be greatly appreciated. Thanks aube Would any one know if Henley Homes is a good Builder to use I seen many reasonable but also many poor reviews With so many builder going bust I thought they would be a… 0 330 Long time forum searcher first time asker. I've got this hideous aluminium frame for a front door and side windows. Is there a way or a product out there that could be… 0 2227 This certainly doesn't look good. I would be engaging with an independent inspector to have a look at this. As for the unscheduled site visits, most builders are quite… 1 22058 |