Browse Forums Building A New House Re: Willowdale Boundary lots 4Apr 14, 2014 10:11 pm http://camdenbuild.blogspot.com.au/ by invite only please pm me Re: Willowdale Boundary lots 8Jun 19, 2014 9:26 am Hi there. I have a block backing onto the acoustic wall, near Patrol St, & when I visited the block recently I stood at the front & back, then on the kerb across the road. The noise insulation was best closest to the acoustic wall, still acceptable at the front of the block, but was noisier at the kerb adjacent to the block across the road. It seemed that the noise from the road was going over the top of my block to a larger extent, & may possibly be noisier for the home that will be located across the street. It may be possible that a lot of the sound will bounce off my roof, & be dispersed rather than go across the road. I purchased my lot as a house & land package. My land is 260m2 (10m x 26m) located in claymore NSW. Under campbelltown council. I know in general the following setbacks would apply ground floor side setback =… 0 4233 thanks Chippy, i hope they have applied sealer but i am doubt to be honest, so i am gonna do this job after handover. 8 11911 You should be able to encase the sewer but you will need it designed and approved and access to lot 580 to do the work 2 12659 |