Browse Forums Building A New House 1 Apr 02, 2014 10:22 pm We want to put tiles in our living, dining, kitchen area as well as the usual bathroom stuff..was wondering who did you use for tiles? did you go with your builder or sourced an outside person.. also how much did you pay...p/sqm... we were after matt tiles and the bigger ones for living spaces.. Thanks in advance!!! Re: Who did you use for tiles.. 2Apr 02, 2014 10:59 pm As part of our standard inclusions we had $30/sqm for tiles at $38/sqm for laying allowed. We found tiles we love in that price range, @ 500mmx500mm. This was the maximum size allowed for laying at that sqm price. This was all through the builder 1st build: viewtopic.php?f=31&t=59376 *New*-2nd build: viewtopic.php?f=31&t=70324&p=1154282#p1154282 Re: Who did you use for tiles.. 4Apr 02, 2014 11:40 pm They are a local builder where I live in Gympie. We found them much more flexible and cost-effective than the others options available; then again, we live in a small town so they have to be more competitive 1st build: viewtopic.php?f=31&t=59376 *New*-2nd build: viewtopic.php?f=31&t=70324&p=1154282#p1154282 That sucks! Hope it all works out. Good to move away from steel anyway for all your reasons, but it's also thermally poor. 16 13709 If what you describe is correct then the brick wall has been dry lined with villa board. That basically means that the villa board is glued to the brick wall with… 3 6086 I'm putting a new floor in my kitchen, slate flagging on a standard concrete slab. I have allowed for a bed thickness of up to 20mm to accommodate the different… 0 15120 |