Browse Forums Building A New House 1 Feb 02, 2014 1:15 pm Hi All, I am trying to work out what size pendant light I should install in the void of the house we are building. The void is 2m x 4.2m with the stairs running along one side of the void. The pendant light we are looking at is a round ball style and the diameters available are 65cm and 100cm. The 65cm one seems to be too small to fill up the void. My question is will the 100cm one be too big? I would prefer to get the 100cm one. Please let me know your thoughts. I'll try and upload the drawing showing the void. Not sure if that works? I was told the issue is the headspace clearance requirement on step 4. My builder is proposing shifting the beam 310mm towards the kitchen...I'm… 2 2557 To me, that's what it looks like: poor backfilling and/or compaction. The width is about 1000mm maybe. That conduit in the photo is for the NBN. The water is about… 4 8039 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11696 |