Browse Forums Building A New House 1 Jan 13, 2014 2:44 pm Re: Pre-Finished solid timber V's un-Finsished solid timber 8Jan 14, 2014 5:33 am Engineered flooring is different than solid. Engineered is comprised of generally a 4mm veneer layer glued to several layers of construction ply. If it's solid floor then go for it. My opinion is the factory finish will look more ( artificial I've seen it) but the polished and sanded at home will fill in all the imperfection and joins with lacquer to make it smoother depending on what grade you are going for also. Ask to see if you can look at it laid Sent from my iPhone using Tapatalk Engineering timber is certainly a less fuss option, times cheaper to supply and install and better withstands humidity. 1 15908 interesting situation what happened after builder issued final invoice? did you list as defect or not does the building surveyor have any responsibility? ie. issuing… 13 46960 Building Standards; Getting It Right! Hi all, My neighbour has built his 15m long garage on our boundary. It was agreed as part of the planning permit that the wall must be in exposed recycled brick. For some… 0 10909 |