Browse Forums Building A New House 1 Feb 25, 2013 4:55 pm Hi We had the builder supply and install our tiles (Perth Builder), however there were a number of hollow/drummy tiles about 100+ which we found. They said they have been replaced but we have found more tiles 38 which are hollow. The builder says they will not change them. Does anyone know where we stand with them replacing the ones we have found? Thanks ShaneG We have been doing heaps of hybrid floors lately. The hollowness is caused by low spots in the slab or subfloor. No slab or particleboard floor is going to be… 1 10422 Hi Mofflepop, I would recommend finding a building designer to prepare plans, they should design to your specified budget. The benefit is you can tender the project out… 9 20432 DIY, Home Maintenance & Repair If the railhead is so poorly fixed it is also likely that the railhead is also non compliant, what about overflows and sealing railhead to the gutters?. 3 5977 |