Browse Forums Building A New House Re: Help - Slab position is different to approved plans 11Nov 26, 2012 3:58 pm 1st build: viewtopic.php?f=31&t=59376 *New*-2nd build: viewtopic.php?f=31&t=70324&p=1154282#p1154282 Re: Help - Slab position is different to approved plans 13Nov 26, 2012 4:46 pm My Build Thread: Coral Homes Noosa 279 Re: Help - Slab position is different to approved plans 14Nov 26, 2012 5:14 pm Modified Fernside 38 Rawson Homes Blog: http://www.thehousethatmatandjenbuilt.blogspot.com Build Thread: https://forum.homeone.com.au/viewtopic.php?f=31&t=60501 Re: Help - Slab position is different to approved plans 16Nov 26, 2012 8:22 pm Building the Ascot 35 with Carlisle Homes in Pasadena Estate, Clyde VIC My build thread: viewtopic.php?f=31&t=59776 Help - Slab position is different to approved plans 17Nov 26, 2012 8:54 pm PPA 30/6/12, Land 28/06/12, Contract 7/9/12, Valuation 11/9/12, Prestart 13/9/12, Settlement 18/10/12, Building Permit Issued 18/10/12, Footings 30/10/11, Slab 31/10/11 Help - Slab position is different to approved plans 18Nov 28, 2012 7:34 pm Any news? Building the Ascot 35 with Carlisle Homes in Pasadena Estate, Clyde VIC My build thread: viewtopic.php?f=31&t=59776 If your patio is going to be 35 sqm then that's going to need Council Approval. The fact that they previously approved your 25sqm patio will be irelevant 1 5515 yep you need a joint, foam is easiest, will look fine once rendered with a joint. 2 5246 Hi, have purchased a house with 2 single garage doors. The Centre pillar one side sits proud to the other. Can I change 2 doors into one. Please see picture. 0 6360 |