Browse Forums Building A New House 1 Apr 25, 2016 10:05 am Re: Is this pipe with joint acceptable? 2Apr 25, 2016 11:26 am Yes, it is acceptable, there is evidence of primer and adhesive. Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Is this pipe with joint acceptable? 6Apr 25, 2016 2:59 pm Steel but hard to tell without seeing your engineering plans. Nothing to worry about Is this pipe with joint acceptable? 8Apr 25, 2016 3:27 pm There should be a detail for pipes penetrations Refer to other pages Re: Is this pipe with joint acceptable? 11Apr 25, 2016 4:27 pm Just be mindful this is a very very minor issue. Nothing will happen if they don't do it Hi all I need a guidance on how far I need to space expansion joints in the concrete driveway and its type (keyway/foam.) Contraction joints are at 3m max for a 125 slab. Thanks 0 10985 Hi, I am planning to select San Selmo reclaimed original for the fascade of my build. I have seen many photos on line of the brick varying from a rustic to a neat finish.… 0 4600 Hi guys, I want to butt a concrete vegetable garden bed against a concrete build up of a carport. It will be a 700mm high wall about 120mm thick and I will run a 12mm rio… 0 2653 |