Browse Forums Building A New House Re: First Time Removing Security Screen on Window 9Aug 15, 2012 8:06 am stormjr I can't see the detail on the frame, but if they are round slightly raised with perfectly round centres they do sound like 'pop' rivets, drill bit slightly larger than the hole in the centre should dill them off. Usually you drill the centre then the top bit you can see comes up the drill bit and the rest of the rivet falls in, usually a pair of pliers will get the rivet off the drill bit (turn off / unplug the drill first of course! ) I agree... but drill gently, it is very easy. Start at the bottom of the screen if you don't want it to fall on your head Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 You have no photo with your post. Best I can say is to remove an A&L flyscreen don't be afraid to distort the frame almost like a trapezium. It doesn't take a lot of… 1 7180 Can anyone give me any onfo on New Homes WA? Good or bad, hopefully good just need to know if my choice was good or not? Thanks ❤️ 0 9063 So it looks like we finally have some movement on site! Definitely later than expected, but I'll take any progress at this point. I'll drop by over the weekend to get… 5 29542 |