Browse Forums Building A New House 1 Jul 03, 2012 10:44 pm i know these type of questions probably come up all the time... and after reading and searching on here i have just become more confused... we are building and have settled on our bricks, and our roof colours... i think... but was wondering if any of you guys out there have any pics of your homes with some of the colours that we have chosen... we are leaning towards Woodland grey for our roof and gutters ( down pipes too) with Shale Grey as our fascia and rollerdoor... we have a creamish coloured brick, called Tuscan, by boral (midland brick formerly in WA) hoping that someone else has chosen as we have and would love to see some pics. also some suggestions as to why and or why not we should use these colours would be welcomed too! thanks for your reply in advance! Jodie Re: Colour Choice Confusion 2Jul 03, 2012 11:08 pm Hi, Take a look at the envisage software on big m's website at http://www.studiom.com.au It allows you to select an image of an exterior and then play around with brick, render, colorbond roof, gutters, fascia, garage doors etc. They have the boral range of bricks so hopefully your selection may be one of the options. House - Lockup completed 23rd December 2011 - Painters are in!!! https://forum.homeone.com.au/viewtopic.php?f=31&t=37261&start=0&hilit=Blaxland Re: Colour Choice Confusion 3Jul 09, 2012 9:54 pm thank you have had a look at the site, very good... and even good fun we are leaning towards dune as opposed to shale grey! does any one have any pics of what they have done?? love to see Thanks again! Jodie Re: Colour Choice Confusion 5Jul 10, 2012 10:00 pm If you do a search on the forums for the type of brick you are wanting you should come across a few photos. There is a brick selection thread as well where people have posted a photo of their home with the brick they have used. House - Lockup completed 23rd December 2011 - Painters are in!!! https://forum.homeone.com.au/viewtopic.php?f=31&t=37261&start=0&hilit=Blaxland Hi All, see above image. The required setback from the rear boundary in my case is 5m, as you can see the shape of the site and location of the boundary is slightly… 0 8451 Thankyou so much 😀 I've decided on White on white for doors and trims, White on white 50% on ceiling and Mt buller for walls. Fingers crossed it will look OK 😀 2 7158 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 11696 |