Browse Forums Building A New House Re: another overhang thread: not wood frame but the sliding door 2Feb 28, 2008 4:21 pm Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: another overhang thread: not wood frame but the sliding 10Jun 11, 2010 8:16 am Not quite getting your picture... the sliding door sill should rest a small amount on the slab along its length... the bit that sits out is supported once the bricks are in place. Ed "ECOECO" At 'EcoEco', we design windows, we design the best windows, we do it for you, so that when you’re happy we are happy. Tel. 1800 326 326 In the end, two pieces of treated timber (20mm thick) were bolted onto the joists and planed when there was too much sticking out. Passed inspection. 13 7821 My door tends to rub against the frame during winter and I'm looking to fix it so it closes smoothly. Looking online on Youtube I'm seeing methods to fix the alignment and… 0 700 Hi, Apologies - I know there is plenty out there on this but struggling to put together the puzzle. We're planning our garage/external laundry to master bedroom and… 0 11121 |