Browse Forums Building A New House Re: How to wire a newly built house 6Feb 19, 2012 6:08 pm Building a Delta 21 at Craigieburn - http://homeofzero.blogspot.com.au/ Deposit: 26/02. Contract: 22/05. Settlement: 29/05. Site start: 18/10. Re: How to wire a newly built house 8Feb 19, 2012 11:04 pm Building with Jandson Homes - Eclipse 18. http://adgnetworks.blogspot.com/ Re: How to wire a newly built house 11Feb 22, 2012 10:30 pm Cheers, Alpal Building PD Heathmont 40 BLOG: http://alpal-pd-heathmont40.blogspot.com/ Deposit paid 19/08/2011 Contract signing 3/10/2011 Site Start 10/11/2011 Slab 23/11/2011 Re: How to wire a newly built house 18Feb 23, 2012 3:53 pm Alpal I wired my own CAT 6 Cable and Coax (TV) throughout the house. Bought a 305m roll on ebay for $90. Checked with my SS first and he gave the all clear. Not to mention illegal if you are not a licensed installer. Love to know how you got it certified... The unit normally clips into a metal plate screwed to the wall, either plate is not flush, or unit not hooked in and could be hanging from the pipes partly, either might… 2 15791 We already paid for somfy motors for the blinds. The quote above was purely for “pre-wiring” so the blinds company can install the motors and blinds. That’s why we… 5 16275 DIY, Home Maintenance & Repair We purchased a 1960s property that is on timber stumps mostly, and a newer section is on concrete stumps. We had a building inspection initially and they reported some… 0 12743 |