Browse Forums Building A New House 1 Jan 21, 2012 12:22 pm Hi all, Would anyone be able to recommend a custom builder who would be able to build in the St George area, and be able to build on a sloping block please? Thanks, G C&G -------------------------------- A new building chapter begins.. Re: Recommended custom builder in St George area? 2Feb 06, 2012 10:01 am Hi Bobbuilder.. I would recommend our Builder he is fantastic, after 10 months of stressing trying to come up with the money for other quotes then having builders no show, we where referred this builder from friends of ours. He came in 70k cheaper, and finished our home within less then 6 months ! Our service was so personalised, he came out to see us so many times before we started and put up with hubby and I changing our mind a zillion times lol ! We never had any problems, besides one mess up with the council which was fixed as soon as it was discovered and our home is fantastic, we are currently looking for a block of land for an investment home and will definetly use him again !!! I have PM'd you his details - and good luck, I must say it is stressful building a home but SO worth it in the end !!!! Re: Recommended custom builder in St George area? 3Apr 24, 2012 10:16 am Hi, we are desperately looking for a builder to do our renovations in the St George area. Are you able to pass me on the details of the one you mention? He sounds great many thanks Clare It is in lake macquarie area and dimensions are width 14 m and depth 8 m and the slope is 1/5 going down from the road. 1 7090 Hi Mofflepop, I would recommend finding a building designer to prepare plans, they should design to your specified budget. The benefit is you can tender the project out… 9 20432 CDC Housing Code 3 When to apply Floor Area external face of wall vs Gross Floor Area internal face of wall. Reading thru CDC Housing Code 3, lets take a lot 915sqm.… 0 16566 |