Browse Forums Building A New House 1 Dec 02, 2011 1:35 pm Hi guys, hope everyone is well.... Quick question.... We are at that stage of the build where all the internal timber doors and rear timber sliding doors have been installed. What id like to know is if someone comes around at a later date and lines them up properly to make sure they shut flush etc...? By the way these doors are yet to be stained Re: Servicing doors during the build ? 2Dec 02, 2011 3:44 pm If they are not right now they should be fixed by the PCI. If they are still wrong make sure they are recorded and the builder should fix in the couple of weeks between then and completion. The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Re: Servicing doors during the build ? 3Dec 02, 2011 8:23 pm If the margins are not even now and the arcs are fitted i'd let your SS know your not happy with them before they are stained and the walls are painted. There should be no reason the doors don't line up after they have been hung. Except for poor workmanship. i would suggest nothing is unreasonable for PCI. we did all sorts, including checking the hot water, checking all the GPO's had power, testing that the showers were… 9 98697 Just to makea point about this, an approach that some people have found sucessful in negotiating these rises down, Is to provide some workings to the builder, specifying… 4 81734 The only thing to add to these comments is that where possible it's always good to try and work with people than just say "no" because you can. Having someone… 4 17155 |