Browse Forums Building A New House 1 Nov 05, 2011 10:08 am Hey Guys, Ive just recieved proposals from a local builder in Yass and 1 from masterton homes and am wondering how close the tender price is to actual finished price... I just keep reading horror stories that the price on the tender never ends up being in the same ball park as the end price which im afraid would blow me away. Any advice or experiences in this area would be muchly appreciated! Thanks in advance Rob Building the Bronte Executive with MJH Latest News: Slab down, frames were to be delivered 30/5 http://escape2country.blogspot.com// Re: Building proposals versus end price 2Nov 05, 2011 12:16 pm It really depends mainly on two things. 1.Does the tender include ground conditions for your block. 2. What you add on to the spec such as extra power points, better fitting etc This link shows how costs increase for a typical project house on a reasonably flat site. http://www.anewhouse.com.au/?p=66 The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Minimum overhang into gutter must be 50mm, turn down tool should not split the sheet. it seems wrong tool for the profile was used, the flashing cannot slope back. Rib… 2 2126 Electrical just got back to me and said the most they can provide is a single power point on the Bedroom 1 side of that wall. After handover, your towel rail installer… 2 3847 |