Browse Forums Building A New House 1 Jan 25, 2008 8:25 am Hi all
Has anyone experienced putting in a floating timber floor after handover from PD and then having issues fitting in the dishwasher in the dishwasher space height wise. I am about to sign my consturction drawings and noticed that my bench top is 900mm from slab level which seems to be the standard and if I add the floorboards under the dishwasherwill their still be enough room to fit in the dishwasher PD are supplying. I am expecting the floorboards to raise the floor level upto 20mm Any advice would be greatly appreciated Re: Dishwashers & floorboards whilst building with PD 2Jan 25, 2008 11:38 am I think all benchtops are 900mm as standard. That's what ours were. We put our floating floors in after, and it was fine (our floating floor probably only added about 12mm). I would measure your dishwasher, but a lot of them have adjustable feet, and are usually only 850 - 860mm or so tall anyway. You should be fine, but husband (cabinet maker) says measure your dishwasher! Re: Dishwashers & floorboards whilst building with PD 4Jan 25, 2008 3:44 pm We're putting in solid timber floors which will raise the floor by 40mm thus were advised to raise all the kitchen benches by 40mm to compensate. Hi All New to the forum and looking for some advice, has anyone else renovated an old miners cottage in or around Ballarat and been able to identify the flooring? We… 0 8758 Thanks for your reply. I will just wait and see I guess. Trying to get some more information from our builder. 9 29927 |