Browse Forums Building A New House Re: Anyone else building in Glenmore Ridge? 21Jul 20, 2011 9:15 pm Hi.. just saw your post so back.. lol..... Not sure how much the fencing will cost. My worry is that i have 5 neighbours to organise fencing with. I am funny how it will look at one side in the outside look and the other is the inner look I only want one or the other.. dont mind which just as long as they are all the same.. otherwise I suppose double cap and lap but that might cost a fair bit.. what do you think about the look of it all? Re: Anyone else building in Glenmore Ridge? 22Jul 20, 2011 9:25 pm ![]() Hi.. just saw your post so back.. lol..... Not sure how much the fencing will cost. My worry is that i have 5 neighbours to organise fencing with. I am funny how it will look at one side in the outside look and the other is the inner look I only want one or the other.. dont mind which just as long as they are all the same.. otherwise I suppose double cap and lap but that might cost a fair bit.. what do you think about the look of it all? Apparently there is now one that looks the same on both sides... My friend told me that there is one that looks like kind like a Z so it looks the same on both sides... I am trying to find it somewhere and If I do I will let you know! OR I build first and have the best side all round! Think it is about $70 a metre for lap and cap installed. So I would have about 76m x 70 = $5320 / 2 = $2660 Building with Fairmont Homes NSW at Glenmore Ridge Lot 1007 Our Builder http://www.fairmonthomesnsw.com.au Our Blog http://drewandrenee.blogspot.com/ Re: Anyone else building in Glenmore Ridge? 23Jul 20, 2011 11:36 pm Ouch I think I will wait and share the costs... I will check out the Z style.. Re: Anyone else building in Glenmore Ridge? 24Jul 21, 2011 9:04 am Well off we go this morning with our $9,000 cheque for our balance of our deposit to our conveyancer for exchange. Our contract took way over the expected time to get sent through. So as of today we will be "locked in" and $9,000 poorer! Lets hope our road doesn't take too long to get built so as we can have more of an idea of what our block will look like. Our block adjoins an existing Blue Hills property and has half of our side fence already there which is sage green colourbond. We are hoping we can at least finish that fence off with colourbond so as it looks the same along that length and not half colourbond and half lap and cap timber. Annette ![]() Re: Anyone else building in Glenmore Ridge? 25Jul 21, 2011 12:07 pm Congrats on your next step. Its a bit ouchy handing over such money.. but at least thats 10K paid of your block! What lot number are you? Re: Anyone else building in Glenmore Ridge? 26Jul 21, 2011 12:22 pm Hi Guys, first post here, im at Glenmore Ridge as well, lot 734, we are going with Elderton Home, the Lautondale ( but bigger ) any else down that end of the ridge? Thanks Richard D Re: Anyone else building in Glenmore Ridge? 27Jul 21, 2011 5:59 pm ![]() Congrats on your next step. Its a bit ouchy handing over such money.. but at least thats 10K paid of your block! What lot number are you? We are lot 1119. Well didn't end up handing over our deposit cheque today as the conveyancer advised us to go speak to the town planner at council with a few issues she raised which could have been an issue with the block. So off Pete goes and chatted to the most unhelpful town planner ever who managed to answer our questions....well kinda sorta I (sounds like he spoke to the work experience kid lol). Anyway we are pretty certainly we are happy to go ahead so will drop off the cheque in the next couple of days. Think we will sleep on it tonight just to be certain. Annette ![]() Re: Anyone else building in Glenmore Ridge? 28Jul 21, 2011 7:48 pm Annette.. what sort of issues came up. We had a few too. but all seem to be just cautionary. Hi Richard, welcome. I think my friend is lot 740. What street are you in? How far are you into the process of getting started? Would love to hear how your building process goes. Question... Layback for the curb... what have you all been charged for this, who are you going to get to do the cut for your driveway and then put the layback in? I was unsure about the square gutter, it has its good and bad points. rounded would have been good so easier for a driveway etc, but the square one will stop people parking half up on the kerb.. I hope this rain goes away before Saturday. We will still go, as there is a marquee for residents, so at least we will be dry. Wisdom have promised our revised tender for tomorrow... fingers crossed. We want to sign it off and get it going. 2nd Question - landscape plan. Did you do it yourself or did your builder do it? Cass Re: Anyone else building in Glenmore Ridge? 29Jul 21, 2011 8:34 pm ![]() Annette.. what sort of issues came up. We had a few too. but all seem to be just cautionary. Hi Richard, welcome. I think my friend is lot 740. What street are you in? How far are you into the process of getting started? Would love to hear how your building process goes. Question... Layback for the curb... what have you all been charged for this, who are you going to get to do the cut for your driveway and then put the layback in? I was unsure about the square gutter, it has its good and bad points. rounded would have been good so easier for a driveway etc, but the square one will stop people parking half up on the kerb.. I hope this rain goes away before Saturday. We will still go, as there is a marquee for residents, so at least we will be dry. Wisdom have promised our revised tender for tomorrow... fingers crossed. We want to sign it off and get it going. 2nd Question - landscape plan. Did you do it yourself or did your builder do it? Cass Are you going to a lot of effort for your landscape plan? our builder just did it without asking and included it in the drawings. Council said nothing about it looks like this Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Building with Fairmont Homes NSW at Glenmore Ridge Lot 1007 Our Builder http://www.fairmonthomesnsw.com.au Our Blog http://drewandrenee.blogspot.com/ Re: Anyone else building in Glenmore Ridge? 30Jul 22, 2011 5:46 am ![]() Well off we go this morning with our $9,000 cheque for our balance of our deposit to our conveyancer for exchange. Our contract took way over the expected time to get sent through. So as of today we will be "locked in" and $9,000 poorer! Lets hope our road doesn't take too long to get built so as we can have more of an idea of what our block will look like. Our block adjoins an existing Blue Hills property and has half of our side fence already there which is sage green colourbond. We are hoping we can at least finish that fence off with colourbond so as it looks the same along that length and not half colourbond and half lap and cap timber. Annette ![]() hi guys,ive got to be a bit careful here but if anyone has some questions about glenmore ridge i might be able to help.i cant exactly state my involvement in the project but lets just say i should be able to answer questions better than anyone else in regards to timeframes for roads and such Re: Anyone else building in Glenmore Ridge? 31Jul 22, 2011 7:15 am ![]() ![]() Well off we go this morning with our $9,000 cheque for our balance of our deposit to our conveyancer for exchange. Our contract took way over the expected time to get sent through. So as of today we will be "locked in" and $9,000 poorer! Lets hope our road doesn't take too long to get built so as we can have more of an idea of what our block will look like. Our block adjoins an existing Blue Hills property and has half of our side fence already there which is sage green colourbond. We are hoping we can at least finish that fence off with colourbond so as it looks the same along that length and not half colourbond and half lap and cap timber. Annette ![]() hi guys,ive got to be a bit careful here but if anyone has some questions about glenmore ridge i might be able to help.i cant exactly state my involvement in the project but lets just say i should be able to answer questions better than anyone else in regards to timeframes for roads and such Our issues with our block were because we have a 2 metre easement half way down one side and also as we are a block in between 2 corner blocks issues raised were in regards to side setbacks for shadowing on both the corner blocks. Meaning we have a 15.5m wide frontage but have to have wide side setbacks to each side would only allow us to build a narrow house. All ended up ok after freaking us out a bit but the town planner assures us normal 900 side setbacks will be the case. We would love to ask how our road is coming along, when should it be started, finished etc and when our land would be registered. We are lot 1119 Cooee Road. At the end which joins Glengarry Drive. We have been advised Oct/Nov by the sales office and conveyancer said Oct yesterday but another opinion would be great.....thanks ![]() Rain Rain...stay away for tomorrow. Looking forward to hopefully meeting you all. My hubby will look like death warmed up as he would have worked a 12 hour night shift before the brunch, so look out for a zombie and you will find us lol. Re: Anyone else building in Glenmore Ridge? 32Jul 22, 2011 8:46 am ![]() Annette.. what sort of issues came up. We had a few too. but all seem to be just cautionary. Hi Richard, welcome. I think my friend is lot 740. What street are you in? How far are you into the process of getting started? Would love to hear how your building process goes. Question... Layback for the curb... what have you all been charged for this, who are you going to get to do the cut for your driveway and then put the layback in? I was unsure about the square gutter, it has its good and bad points. rounded would have been good so easier for a driveway etc, but the square one will stop people parking half up on the kerb.. I hope this rain goes away before Saturday. We will still go, as there is a marquee for residents, so at least we will be dry. Wisdom have promised our revised tender for tomorrow... fingers crossed. We want to sign it off and get it going. 2nd Question - landscape plan. Did you do it yourself or did your builder do it? Cass Hi, i am 32 tall trees ( the one with the dead grass ), the dp had me listed as 2 domus but i can pick, we have to find out how deep the water pipes are as the sewer runs close to my house, so maybe 2-3 weeks away from any real movement. the cut away was in my building spec. i am doing the landscaping, i spoke to the lawns people and they said to poision ( round up ) the block before we got started so we have a clean slate. i havent seen anyone out at the block, does anyone visit? Re: Anyone else building in Glenmore Ridge? 33Jul 22, 2011 3:49 pm Welcome lot 734 its great to see more people popping in. Blushing here I visit the block a few times a week, in hope to meet my neighbours and to see if the park was ready. The kids love doing the drive by... We signed off our revised tender today. Wisdom got it all right so no further revisions.. more money paid out and now its off to drafting.../Contract so we can get ready for Stockland, Council and the bank... We have added a few variations and to the house ie Gas Fire, swap the back end about, extra storage in the garage... yet to do the colour appointment for tiles and kitchen.. that might be a little scary.. really want to keep the costs to a minimum. We will do our own landscaping to the block. Annette - great to hear that all was resolved with your block. We will be there too, webbed feet will be required.... Maybe gum boots for the kiddies... Re: Anyone else building in Glenmore Ridge? 35Jul 23, 2011 8:16 am Well the sun is shining here in Glenmore Park today, lets hope it stays that way for our brunch today. Looking forward to hopefully meeting some fellow H1 peeps and fellow neighbours ![]() Re: Anyone else building in Glenmore Ridge? 36Jul 23, 2011 8:34 am yes blue skies here too. see you all there! Re: Anyone else building in Glenmore Ridge? 37Jul 23, 2011 4:00 pm Massive story about my place today... Will update when I have 20mins to type it out... Building with Fairmont Homes NSW at Glenmore Ridge Lot 1007 Our Builder http://www.fairmonthomesnsw.com.au Our Blog http://drewandrenee.blogspot.com/ Re: Anyone else building in Glenmore Ridge? 38Jul 23, 2011 6:21 pm ![]() Massive story about my place today... Will update when I have 20mins to type it out... Ooooooohhhhhh hope everythings ok! Bit disapointed with todays brunch. We felt it wasn't organised very well to be able to find or recognise people who are or could of been our neighbours. Only stayed an hour and a half as it was so cold and hubby needed sleep after working nightshift. Hope everyone else had more luck and enjoyed the day more than us. We did speak to some lovely poeple though ![]() Re: Anyone else building in Glenmore Ridge? 39Jul 23, 2011 8:01 pm Hi... I agree Annette it was very disorganised, no real formal greeting to the residents. The BBQ a few months ago, was much better organised. We managed to find Drew and Renee, Matt and also Es and Tim. Annette, it was a shame we did not get to meet up. We did freeze a little, but it was good chatting and we look forward to getting to know everyone a little more. Drew - wow just checked your blog - looking great and its only one grind! We went back out to Austral Bricks after the Park and are still liking the Symmetry. It will now just come down to cost. Re: Anyone else building in Glenmore Ridge? 40Jul 23, 2011 10:12 pm ok so I will copy what happened today from my blog.... What an amazing day - would go as far to say that it was one of the most memorable days I can remember. Here is a summary of the day 7:00am - Ivan was to be on site with his equipment and generator to grind the slab 8:00am - get a txt from Ivan to advise he was bogged as the ground was very soft and muddy 8:30am - in the car off to Bunnings to get tow rope to save Ivan 9:00am - Arrive on site and generator (massive power generator on trailer) is bogged due to all the rain and MUDDY as! 9:30am - 2 attempts to get the generator on site and bogged both times. Ivan calles Coates Hire and requested a machine quote to crane the equipment onto the slab - Coats hire want...... $1000 to do it which is far from what I can afford! 10:00am - Ivan goes to Kennards and gets a heavy duty trailer to try and make it easier to get on site instead of the crane options - again the ground is soaking wet and muddy and very bag - cant even walk on it - that bad 10:30am - New trailer arrives and again.... gets bogged and have to tow that out as well 10:45am - Frustrated and have no idea what to do - head up to the Glenmore Ridge Park opening and run into Matt (client of mine that I did a home loan for 2 days ago!!!) - also building in Glenmore Ridge and explain the story. Matt says "I can get a crane here in 30 mins!!" - not what you know its who you know 11:00am - Me and Matt drive to Emu Plains to get a truck with a crane on the back - drive back to site and crane the machines onto the slab - watching in amazement! 11:30am - Ivan on site grinding, I am thanking Matt to no end and standing back in amazement on what had transpired during the day.. Matt thankyou so much....!!!!! 4:00 - get a message from Ivan that the generator has Sh*t itself and Coates are coming out at 7am to fix it... Like I said the day went from bad to worst to good and back to bad and Ivan took it all in his stride - Without Matt coming to the rescue nothing would have happened and wasted lots of $$$ with hiring equipment with no result. Have a look at the photos - Had to take some to back up this story..... Can you believe that I got a crane??? Check out the blog for photos!! Building with Fairmont Homes NSW at Glenmore Ridge Lot 1007 Our Builder http://www.fairmonthomesnsw.com.au Our Blog http://drewandrenee.blogspot.com/ A survey must’ve completed by a certified surveyor. This form part of every DA requirement 3 223632 Wish you all the best. Once you signed the contract, they will find millions excuses to charge you. And have seen their sites unfinished for a long time. 4 24834 As title suggests, looking at using the interlocking Pentablock stacked stone products to replace failing timber retaining… 0 17879 |